EasyManuals Logo

Draytek Vigor167 User Manual

Draytek Vigor167
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
45
host on the LAN that relays all traffic coming into and going out of the
LAN. The gateway is normally the router, and therefore the Gateway IP
Address should be identical to the IP Address in the IPv4 section
above.
Lease Time - The maximum duration DHCP-issued IP addresses can
be used before they have to be renewed.
Primary DNS - DNS stands for Domain Name System. Every Internet
host must have a unique IP address, also they may have a
human-friendly, easy to remember name such as www.yahoo.com.
The DNS server converts the user-friendly name into its equivalent IP
address.
You must specify a DNS server IP address here because your ISP
should provide you with usually more than one DNS Server.
Secondary DNS - You can specify secondary DNS server IP address
here because your ISP often provides you more than one DNS Server.
If Relay is selected as
DHCP Server
When selected, all DHCP requests are forwarded to a DHCP server
outside of the LAN subnet, and whose address is specified in the
DHCP Server IP Address field.
Interface for 1st DHCP Server - Specify a WAN interface for the first
DHCP Server.
1st DHCP Server IP Address - Enter the IP Address of the DHCP
server to which DHCP requests from LAN clients are forwarded.
Interface for 2nd DHCP Server - The secondary DHCP server is an
optional setting. If required, specify a WAN interface for the second
DHCP Server as a backup server.
2nd DHCP Server IP Address - Enter the IP Address of the DHCP
server to which DHCP requests from LAN clients are forwarded.
More settings
Force DNS Redirection Switch the toggle to enable or disable the function.
It allows all outgoing DNS lookups to be intercepted and redirected to
the router's built-in DNS server, improving the domain lookup
performance by caching DNS queries and results.
Virtual Interface Switch the toggle to enable or disable the function.
The virtual interface is a routing interface that can be used for routing
packets to specified domain.
IP Address - Enter an IP address.
Subnet Mask - Select a subnet mask.
After configuring this option, set a Bind IP to MAC profile (based on
the IP address and subnet mask set above) or specify a static IP for the
clients.
Cancel Discard current settings and return to the previous page.
Apply Save the current settings and exit the page.
After finishing this web page configuration, please click Apply to save the settings.

Table of Contents

Other manuals for Draytek Vigor167

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor167 and is the answer not in the manual?

Draytek Vigor167 Specifications

General IconGeneral
VDSLYes
InterfaceRJ-45, RJ-11
Modem speed30000 Kbit/s
Antenna typeInternal
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)0 - 45 %
DC input voltage12 V
Power consumption (typical)4.4 W
Routing protocolsIP
Weight and Dimensions IconWeight and Dimensions
Depth181 mm
Width40 mm
Height125 mm
Weight270 g

Related product manuals