Draytek Vigor167 - WAN Configuration (Modem Mode)

17

Note:
Switch these two icons by click the mouse cursor on them.
- means “Enable”.
- means “Disable”.
II-1-2 WAN
When the operation mode is configured as Modem Mode, the Configuration>>WAN page will be
shown as the following page.
This page is to configure the general settings for WAN connection.
Available settings are explained as follows:
Item Description
Name Displays the name of the interface.
Physical Mode Displays the physical mode (e.g., ADSL, VDSL, and etc.) used by the
WAN interface.
Option Edit - Click to modify the interface name and physical mode.
To configure the detailed settings for the selected WAN interface, click the Edit link to the right side
of the WAN interface.