Draytek Vigor167 User Manual

23
Enabled Switch the toggle to enable or disable the function.
Destination IP Address Enter the IP address as the destination IP address.
Subnet Mask Select a subnet mask of this static route.
Interface Use the drop-down list to specify an interface for this static route.
Gateway Enter an IP address as the gateway.
Cancel Discard current settings and return to the previous page.
Apply Save the current settings and exit the page.
After finishing this web page configuration, please click Apply to save the settings.

Note:
Switch these two icons by click the mouse cursor on them.
- means “Enable”.
- means “Disable”.

Draytek Vigor167 Specifications

General

VDSL	Yes
Interface	RJ-45, RJ-11
Modem speed	30000 Kbit/s
Antenna type	Internal
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	0 - 45 %
DC input voltage	12 V
Power consumption (typical)	4.4 W
Routing protocols	IP

Weight and Dimensions

Depth	181 mm
Width	40 mm
Height	125 mm
Weight	270 g