80
manually.
Management Services
Enforce HTTPS Access
Enable the checkbox to allow system administrators to login Vigor
router via HTTPS.
Allow PING from LAN Allow all PING packets from LAN.
Allow PING from
Internet
Allow all PING packets from the Internet. For increased security, this
setting is disabled by default.
Port
Specify user-defined port numbers for the HTTP, HTTPS,SSH and
Telnet servers.
LAN Access
Select the checkbox to allow system administrators to login from LAN
interface.
IPv4 WAN Access
Select the checkbox to allow system administrators to login from IPv4
WAN interface.
TLS/SSL Encryption
TLS 1.3/TLS 1.2/
TLS 1.1/TLS 1.0/SSL 3.0
Switch the toggle to enable or disable the function.
Enable SSL 3.0 and / or TLS 1.3/1.2/1.1/1.0 – Check the box to enable
the function of SSL 3.0 and/or TLS 1.3/1.2/1.1/1.0 if required.
Due to security consideration, the router's built-in HTTPS and SSL VPN
server had upgraded to TLS1.x protocol. If you are using an old
browser(eg. IE6.0) or an old SmartVPN Client, you may still need to
enable SSL 3.0 to make sure you can connect, however, it's not
recommended.
Note:
Switch these two icons by click the mouse cursor on them.
- means “Enable”.
- means “Disable”.
To Next Page
Loading...
