1-1
Chapter 1 Before Operation
Chapter 1 Before Operation
1. Features
• This machine is designed to fold paper into six popular folding modes.
Single fold Double fold Irregular
accordion fold-out
Letter fold
Accordion-fold
Gate fold
• Use the cross fold lever to fold single folded paper further into standard folding.
* : To perform cross fold with the DF-970, the DF CROSS FOLD UNIT (option) is needed.
• Use the DF HAND FEED KIT (option) to bind and fold at maximum three sheets of paper simultaneously.
2. Setting Up the Machine
2-1. Before installation
• Do not fall down the folding plates. Make sure the folding plates are not subject to shock. Otherwise, the
folding plates may damage, resulting in poor folding accuracy.
• The machine may make loud sounds while operating according to the processing speed and paper used
due to its paper-folding mechanism.
• Be sure to move this machine with the bottom surface of
this machine held by two persons.
To Next Page
Loading...
Need help?
General
