3-20
Chapter 3 Advanced Operation
4-3. Cross fold paper at the desired folding position
Cross fold is a method to cross-fold standard or non-standard paper at arbitrary positions. Standard paper or
non-standard paper is handled in the same way and cross-folded by using a method to register the folding
position as a custom folding.
1
Register custom folding referring to the procedures of “3. Custom Folding” (p.3-8).
2
Single-fold the paper in the custom folding mode.
3
Register the single-folded paper again as custom folding referring to the procedures of
“3. Custom Folding” (p.3-8).
4
Take procedures for “4-1-1. Stacking paper” step 2~ “4-1-2. Adjustment of the parts”,
and “4-1-3. Operation procedures” of “4-1. Cross fold of standard paper” (p.3-13).
5. Using Special Paper
5-1. Art paper, coated paper
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
Art paper and coated paper often stick to each other due to the printing ink and become dicult to separate,
resulting in double-feed. When using these types of paper, follow the procedure below.
1
Separate paper well.
Some of recycled art or coated paper may be
unsuitable for folding due to weak stiness.
2
Align the paper.
To Next Page
Loading...
Need help?
General
