3-21
Chapter 3 Advanced Operation
25 mm
0.98 inch
3
Stack the paper on the paper feed tray.
4
Attach the paper feed guide.
Do not stack too many sheets of paper on the
paper feed tray. If too many sheets are stacked,
the paper will stick on each other from its
height and become dicult to separate,
resulting in double-feed.
The amount of stacked sheets should be
about half the weight of the paper feed guide
(approx. 25 mm/0.98 inch).
5
Set the feeding pressure adjustment
lever to [3].
• Set the paper feed pressure within the [3]
to [5] range on the scale.
• If the paper slips and mis-feed occurs,
increase the paper feed pressure to [4] or
[5].
6
Set the separating pressure adjustment
dial to [2.5].
If double-feed occurs, increase the separating
pressure by [0.5] at a time.
7
Press the test key to test fold.
8
Check the nish.
If abnormal folding occurs, decrease the processing speed.
After completing folding operation of art paper or coated paper, return the paper feeding
pressure and separating pressure each to [0]. If ne quality paper is used with the paper feed
pressure and separating pressure set to the values for art paper and coated paper, double-feed
may occur, or leading edge of paper may be damaged.
To Next Page
Loading...
Need help?
General
