3-6
Chapter 3 Advanced Operation
Registering the adjusted value
Adjustment values of folding misalignment in the vertical direction of thirty-six registration types including
six standard folding modes x six types of standard paper sizes can be registered. (ve standard paper sizes
For North America) Once adjustment values are registered, folding operation can be performed in the same
condition as the registration is made without registering the same adjustment.
Register the values by press the key longer after adjustment the folding plates 1 and 2. The buzzer
sounds “pi” once and the adjustment value is registered.
Adjusted folding stopper position can be registered to special folding.
(p.3-8)
The adjustment values cannot be registered for standard folding of non-standard paper.
1-3. Deformed folding
The paper may not be folded properly due to the characteristics of paper. In such cases, check the following
points.
• Do not use paper outside the specications.
Particularly, deformed folding occurs
frequently in the use of thin, imsy paper not
appropriate.
• Lower the processing speed when deformed
folding occurs for thin and imsy paper.
(p.3-24)
• Separate paper well prior to stacking.
(p.1-18)
• Stack paper on the paper feed tray after
aligning well, and set the paper feed guides at
the correct positions. Also tighten the xing
screws of the paper feed guides rmly.
(p.2-3)
To Next Page
Loading...
Need help?
General
