1-6
Chapter 1 Before Operation
13
Open the paper receiving tray to the
right side seen on the operating side.
14
Attach the auxiliary paper ejection
guide to the stacker roller.
2-4. Connecting power cord
1
Install the power cord to the machine.
Otherwise electric hazards
may occur.
Do not touch the power
plug with wet hands.
2
Connect the power plug to the outlet.
2-5. Checking Operations
• Use the paper to be used actually when checking operations.
• The folding position may be subtly dierent when using the machine with the settings at the shipment
unchanged under the inuence of the thickness and stiness of paper to be used. The folding position
may also be subtly dierent as the characteristics of paper may vary depending on the purchase season
even if the paper of the same size is purchased.
For checking operations, refer to “Chapter 2 Basic Operation” (p.2-1).
To Next Page
Loading...
Need help?
General
