1-3
Chapter 1 Before Operation
2-3. Installation procedures
1
Open the side cover.
2
Remove the tape xing the interlock
lever.
Be sure to remove the tape xing the
interlock lever. The interlock does not
function when using the machine without
removing the tape.
3
Check that the folding stopper does not
protrude from the cover on the paper
feeding side of the folding plate 2.
When attaching the folding stopper to this
machine with the folding stopper protruding
from the cover, the folding stopper will touch
inside the machine. If so, rotate the gear in
the direction of an arrow to move the folding
stopper to the inner section of the cover.
Do not hold the belt section of the folding
plate 2. Doing so will result in malfunction
of the machine.
To Next Page
Loading...
Need help?
General
