3-15
Chapter 3 Advanced Operation
Screw
4
Open the top cover.
Open or close the top cover
gently.
Hands or ngers may be caught in the
cover section. Doing so may result in
injury.
5
Loosen the screw of the auxiliary paper
feed ring (for moving) using the T-
handle hexagonal wrench, accessory
part.
Do not use the T-handle hexagonal wrench
for a purpose other than handling the
auxiliary paper feed ring as instructed in
this manual.
Fire, electrication, injury,
malfunction, or breakdown may
be caused by disassembling the
parts which are not specied in
this manual.
Do not disassemble the
product more than needs.
6
Move the auxiliary paper feed ring.
Move the auxiliary paper feed ring so that the folding line of the paper will be in the center of the ring.
7
Tighten the screw loosened.
Store the T-handle hexagonal wrench in the original position after adjustment the auxiliary paper feed
ring.
8
Set the separating pressure adjustment dial to [0].
Set the paper separating pressure as low
as possible. Setting it high will cause the
single-folded paper to open during paper
feed, resulting in paper feed error.
To Next Page
Loading...
Need help?
General
