3-29
Chapter 3 Advanced Operation
OtherSetting 1/4
Stack Roll Adj
Oper Mode
Test Feed Set
1
Press the menu key to display [Other Setting].
2
Select [Stack Roll Adj] with the or
key.
Stack Roll Adj
15
3
Press the key.
The [Stack Roll Adj] screen is displayed, and at
this stage a numerical value can be changed.
4
Select a numerical value on the keypad or with the key.
Selected range : [0] to[16]
• As the numerical value decreases, the stacker roller position moves to the inner side of the machine,
and as the numerical value increases, the stacker roller position moves to the outer side of the
machine.
• Use [0] when paper jam occurs in Cross fold. When the value is set to [0], the processing speed
decreases.
Stack Roll Adj
10
5
Press the key.
The changed numerical value is set and the
stacker roller moves.
6
Press the key.
Returns to the [Other Setting].
7
Press the key.
Returns to the top screen.
When the paper size or folding mode is changed, the former value is cleared.
When the paper size is changed according to the automatic detection of paper size, the value will not be
cleared. (DF-980)
To Next Page
Loading...
Need help?
General
