4-16
CHAPTER 4 FINE-ADJUSTMENT AND OPTION SETTING
2.
Press the next button to display other option screen.
3.0
2.00
1.00
0
5.00
Next Button
Nipping Time
Example
3-3. Setting the Clamp Speed
The thicker the book block is or the deeper the milling depth is, the more likely errors related to milling
occur. When the following caution messages are displayed, adjust the clamp horizontal movement
speed.
1.
Press or to change the clamp speed.
Setting range: 1 to 20
Default setting: 20
Example
20
Next Button
Clamp speed
20
2
1
To Next Page
Loading...
