1-18
CHAPTER 1 BEFORE OPERATION
8. Cautions for Handling
1) Do not put your hand inside the machine during machine operation. This may cause you
severe injury.
2) Do not touch blades (milling blade and roughening blade) during machine operation. This
may cause you severe injury.
Milling guide
Roughening blade
Milling blade
Protect cover
3) Do not touch the hot melt glue while it is being melted. This will cause burn injuries.
4) While the clamp is moving, keep your hand and head out of the book block feeding
section.
To Next Page
Loading...
