3-17
CHAPTER 3 STARTING BINDING OPERATION
4. Removing the Booklet
When biniding operations are complete, a finished booklet with a cover will be discharged
automatically to the stacker. Remove the booklet from the stacker following the procedures below. For
a booklet without a cover, take it out from the clamp yourself.
Do not take out a booklet while the machine is in operation. It may cause unexpected
injuries.
1.
Pull the stacker stopper to your side.
2.
Remove the finished booklet from
the machine.
3.
Push back the stacker stopper all the
way in.
To Next Page
Loading...
