Setup
Operating Instructions 669 - 00.0 - 08/2019 103
6.14.1 Assembling the compressed air maintenance
unit
Fig. 65: Assembling the compressed air maintenance unit
To assemble the compressed air maintenance unit:
1. Connect the connection hose to the compressed air supply
using a hose coupling R 1/4”.
6.14.2 Setting the operating pressure
Proper setting
Refer to the Technical data ( p. 43) chapter for the permissible
operating pressure. The operating pressure cannot deviate by
more than ± 0.5 bar.
Check the operating pressure on a daily basis.
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the
machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
To Next Page
Loading...
