Setup
Operating Instructions 669 - 00.0 - 08/2019 69
6.4.3 Completing the tabletop for stand MG 56-3 with
FIR clutch motor
Fig. 37: Completing the tabletop (1)
To complete the tabletop:
1. Turn over the tabletop (8).
2. Screw on the sewing light transformer (1).
3. Screw on the cable duct (3).
4. Screw on the drawer (4).
5. Screw on the main switch (5).
6. Screw on the power supply (6).
7. Screw on flap trays (7) using two wood screws per tray.
(1) - Sewing light transformator
(2) - Clutch motor
(3) - Cable duct
(4) - Drawer
(5) - Main switch
(6) - Power supply
(7) - Flap trays
(8) - Tabletop
④⑤⑥⑦⑧
⑦①② ③
(5x25) x2 (4x20) x2
(3,5x17) x2
(5x25) x2 (4x20) x2 (5x25) X2
(3,5x17) x6
To Next Page
Loading...
