Operation
20 Operating Instructions 669 - 00.0 - 08/2019
4.2 Inserting or changing the needle
Fig. 3: Inserting or changing the needle
WARNING
Risk of injury from sharp and moving parts!
Puncture possible.
Switch off the machine bevore changing the
needle.
NOTICE
Property damage may occur!
The insertion of a thinner needle can lead to skipped stitches
or damage to the thread!
The insertion of a thicker needle can result in damage to the
hook tip or the needle!
When switching to a different needle, adjust the clearance
between the hook and the needle.
(1) - Needle bar
(2) - Screw
(3) - Groove
To Next Page
Loading...
