DURKOPP ADLER 669 ECO - Connecting the Hall Sensor

Setup
88 Operating Instructions 669 - 00.0 - 08/2019
6.12.2 Connecting the Hall sensor
Fig. 56: Connecting the Hall sensor (1)
To connect the Hall sensor:
1. Screw off the arm cover (1).
2. Screw off the valve cover (2).
Fig. 57: Connecting the Hall sensor (2)
(1) - Arm cover (2) - Valve cover
①
②
(3) - Cable
(4) - Holder
(5) - Screws
(6) - Hall sensor
(7) - Clip
(8) - Screws
⑥⑤④③ ③
⑧⑦
③