DURKOPP ADLER 669 ECO - Cleaning the Filter Element

Maintenance
60 Operating Instructions 669 - 00.0 - 08/2019
To drain water condensation:
1. Disconnect the machine from the compressed air supply.
2. Place the collection tray under the drain screw (3).
3. Loosen the drain screw (3) completely.
4. Allow water to drain into the collection tray.
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.
5.3.3 Cleaning the filter element
Fig. 30: Cleaning the filter element
To clean the filter element:
1. Disconnect the machine from the compressed air supply.
2. Drain the water condensation (( p. 59)).
3. Loosen the water separator (2).
NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter
tray.
(1) - Filter element
(2) - Water separator
(3) - Drain screw
①
③
②