Setup
66 Operating Instructions 669 - 00.0 - 08/2019
6.4 Table top
Ensure that the tabletop has sufficient load-bearing capacity and
strength.
6.4.1 Completing the tabletop for stand MG 55-3 with
FIR clutch motor
Fig. 34: Completing the tabletop (1)
To complete the tabletop:
1. Turn over the tabletop (4).
2. Screw on the cable duct (1).
3. Screw on the main switch (2).
4. Screw on the power supply (3).
5. Screw on the drawer (5).
6. Screw on the sewing light transformer (6).
(1) - Cable duct
(2) - Main switch
(3) - Power supply
(4) - Tabletop
(5) - Drawer
(6) - Sewing light transformer
(7) - Clutch motor
①
②
③④
⑤⑥⑦
(3,5x17) x2 (4x20) x2
(4x20) x2
(5x25) x2
(3,5x17) x2
To Next Page
Loading...
