Setup
Operating Instructions 669 - 00.0 - 08/2019 85
6.11 Assembling the knee switch
The sewing feet can be lifted mechanically by the knee switch.
Fig. 52: Assembling the knee switch (1)
To assemble the knee switch:
1. Position the knee switch (1) from below so that the nose (2)
points to the front.
2. Tighten screw (3) into the machine base.
Fig. 53: Assembling the knee switch (2)
To align the knee switch:
1. Loosen screws (4) and (5).
2. Align the knee switch.
3. Fasten screws (4) and (5).
(1) - Knee switch
(2) - Nose
(3) - Screw
(4) - Screw (5) - Screws
To Next Page
Loading...
