Maintenance
Operating Instructions 669 - 00.0 - 08/2019 57
You can order the lubricating oil from our sales offices using the
following part numbers.
5.2.1 Checking the oil level in the machine head
Fig. 27: Checking the oil level in the machine head
Proper setting
The oil level must not raise above the MAX marking (4) or drop
below the MIN marking (3).
To top off the oil:
1. Fill oil through the hole (2) up to the MAX marking (4).
Container Part no.
250 ml 9047 000011
1 l 9047 000012
2 l 9047 000013
5 l 9047 000014
(1) - Oil reservoir
(2) - Hole
(3) - MIN marking
(4) - MAX marking
To Next Page
Loading...
