Setup
Operating Instructions 669 - 00.0 - 08/2019 79
6.8 Assembling the sewing light
Fig. 46: Assembling the sewing light (1)
To assemble the sewing light:
1. Screw off the arm cover (2).
2. Use a 4.5-mm Ø bit to drill the fastening holes (3).
3. Screw the retainer piece (5) using screw (4).
Fig. 47: Assembling the sewing light (2)
(1) - Sewing light
(2) - Arm cover
(3) - Holes
(4) - Screws
(5) - Retainer piece
(2) - Arm cover
(6) - Valve cover
(7) - Main switch
To Next Page
Loading...
