What causes loose stitches on DURKOPP ADLER 669 ECO Sewing Machine and how to fix it?
Loose stitches on your DURKOPP ADLER Sewing Machine can be caused by thread tensions that are not properly adjusted to the sewing material, its thickness, or the thread being used. Another cause is incorrect threading of the needle thread and hook thread. Check the threading path and thread tensions to resolve this issue.
Why is the thread breaking on my DURKOPP ADLER 669 ECO Sewing Machine?
Thread breakage in your DURKOPP ADLER Sewing Machine can occur due to several reasons. Ensure the needle thread and hook thread are correctly threaded. A bent or sharp-edged needle can also cause this, so replace the needle if necessary. Verify that the needle is correctly inserted into the needle bar and that you are using a suitable thread. Tight thread tensions, sharp-edged thread-guiding parts, or a damaged throat plate, hook, or spread could also be the cause. Check the threading path and thread tensions. If the throat plate, hook, or spread are damaged, have them reworked by qualified specialists.
What to do if my DURKOPP ADLER Sewing Machine is missing stitches?
If your DURKOPP ADLER Sewing Machine is skipping stitches, several factors could be responsible. First, check that the needle thread and hook thread are correctly threaded. Replace the needle if it is blunt or bent. Ensure the needle is correctly inserted into the needle bar and that you're using the recommended needle thickness. Also, verify the reel stand is assembled correctly and that the thread tensions are not too tight. Finally, inspect the throat plate, hook, or spread for damage; if damaged, have these parts reworked by qualified specialists.
General| Stitch Type | Lockstitch |
|---|---|
| Needle System | 134-35 |
| Table Size | Standard |
| Motor Power | 550 W |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Motor Type | Servo Motor |
| Weight | 45 kg |
| Max Speed | 3000 stitches/min |
To Next Page