Setup
Operating Instructions 669 - 00.0 - 08/2019 75
6.5 Setting the working height
The working height of the stand MG 55-3 is adjustable between
750 mm and 900 m.
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal
damage if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
To Next Page
Loading...
