3 Tests and Diagnostics
PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941) [CONFIDENTIAL] 3-11
Enter C ……Restarts the test execution
Enter E…….Ends the test. The program returns to the screen to select Error
Stop and Test Loop item selection.
Select No: though any error occurs during the test, the test is continued.
The setting of Yes/No can be changed by pressing ENTER.
Go to Test
The subtest is started in the conditions selected above by entering ENTER.
For more information about the tests in the Main Test Menu and other tests, refer to Section
3.6 or later.
To Next Page
Loading...
Need help?
General