3 Tests and Diagnostics
3-38
[CONFIDENTIAL] PORTÉGÉ X30W-J, dynabook V*/VZ*/VC* Series Maintenance Manual (960-941)
< Acceleration Calibration test>
There are four steps in the Acceleration calibration test.
Step 1: Lay the PC as the display faces up.
Touch “Setup OK” button when the PC is ready.
When
“STEP 1 XXXXXX” is displayed, go to the next step.
Step 2: Make the side with the power button bottom side slowly.
When
“STEP 2 XXXXXX” is displayed, go to the next step.
To Next Page
Loading...
