Dynamic DX2-REM550 User Manual

64 GBK60348: Issue 3
Joystick Swap Forward/Reverse 4.2.2.2
Parameter
Possible Values
Default
HHP
Lite
Std
Adv
Joystick Swap Forward/Reverse
Yes/No
No
-



If this parameter is set to 'Yes', the forward and reverse operation of the joystick is
swapped.
No Yes
Set Joystick Swap Forward/Reverse to 'Yes' if a remote is mounted in a reverse
orientation.
Joystick Swap Forward/Reverse must be set for every Drive Profile separately. The
value only applies to the joystick that is used in that particular Drive Profile.
Different settings can be applied to different joysticks. For example, the attendant
joystick can be forward-reverse swapped while the user joystick is not swapped.
Joystick Swap Left/Right 4.2.2.3
Parameter
Possible Values
Default
HHP
Lite
Std
Adv
Joystick Swap Left/Right
Yes/No
No
-



If this parameter is set to 'Yes', the left and right operation of the joystick is swapped.
No Yes
Set Joystick Swap Left/Right to 'Yes' if a remote is mounted:
 upside-down (for example with chin or tray applications)
 vertically to give forward driving when the joystick is deflected reverse.
Joystick Swap Left/Right must be set for every Drive Profile separately. The value only
applies to the joystick that is used in that particular Drive Profile.
Different settings can be applied to different joysticks. For example, the user joystick
can be left-right swapped while the attendant joystick is not swapped.
Left
Right
Reverse
Forward
Right
Left
Reverse
Forward
Left
Right
Reverse
Forward
Left
Right
Forward
Reverse

Dynamic DX2-REM550 Specifications

General

Brand	Dynamic
Model	DX2-REM550
Category	Video Game Controller
Language	English