CHAPTER 4
Loading the Vehicle
DynoWare RT Upgrade for Model 424x Dynamometers Installation Guide
4-2
LOADING THE VEHICLE
Use the following steps to load a vehicle on the dyno. Refer to your lift instructions for
lift operation.
You will need the following parts:
part description part description
tire chock (4)
P/N 2A092
car tie-down, 2" x 10' (4)
P/N 500-C10
short axle strap, 10M #,
2 x 21" (4)
P/N 30AS21
car tie-down, high
performance, 2" x 10' (2)
P/N 500-C10W/S
long axle strap, 10M #,
2 x 72" (4)
P/N 30AS72
To Next Page
Loading...
