Eaton Power Xpert C445 - Page 178

Chapter 9—C445 Logic Engine and Expansion I/O
164 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
LT—Less Than
The LT function block sets OUT to TRUE if IN1 is lesser than IN2.
OUT = TRUE IF IN1 < IN2
NE—Not Equal To
The LT function block sets OUT to TRUE if IN1 is not equal to IN2.
OUT = TRUE IF IN1 ≠ IN2
Parameter Data type Description
IN1, IN2 INT, DINT, UINT, REAL Inputs to be compared
OUT BOOL Output
Parameter Data type Description
IN1, IN2 INT, DINT, UINT, REAL Inputs to be compared
OUT BOOL Output