Eaton Power Xpert C445 - C445 Module Assembly; Motor Wiring Connections-Typical

Chapter 3—Installation and Wiring
12 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
C445 Module Assembly
Note: Power down the C445 before adding or removing option cards or RTC module.
Figure 15. Component Exploded View (C445B...Base Module, C445M...Measurement Module, Accessory Cover,
C445XO-TRTC Real Time Clock Module, C445C... Communications card(s))
Figure 16. Option Cover Removal
Do not remove or install modules while the device is powered.
Remove the blank cover on the base control module to install the Memory/RTC
(C445XO-RTC) Module and/or Communication Card (C445XC…).
If installing only the Memory/RTC module, put the blank cover back in place.
If installing a Communication Card, the blank cover can be discarded.
2
1