Eaton Power Xpert C445 - Figure 57. C445 System Connection; Figure 58. C445 System Connection with Ground Fault Included

Chapter 3—Installation and Wiring
44 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
RJ12 Connections for C445 System
Below is a diagram showing how a C445 system is
connected when a Base Control Module, a Measurement
Module and a User Interface are used.
Figure 57. C445 System Connection
Ground Fault Module
When a Ground Fault Module is included in the C445
system, it is connected between the Base Control Module
and the User Interface Module as shown below, or between
the Base Control Module and the Measurement Module, not
shown. The Ground Fault Module has 2 RJ12 ports on the
bottom for connecting to the Base Control Module and the
User Interface Module or the Measurement Module.
Figure 58. C445 System Connection with Ground Fault Included