Eaton Power Xpert C445 - Table 97. Discrete Output Object-Class 0 X9

Appendix C—Optional Communication Cards
Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com 263
Table 97. Discrete Output Object—Class 0x9 (9)
Class Services
Service code Service Name
0x0E Get Attribute Single
Instance Services
Service code Service Name
0x0E Get Attribute Single
0x10 Set Attribute Single
Class Attributes
Sr. No. Attribute ID Access Rule Data Type Name Attribute Description
1 1 (0x1) Get UINT Revision Revision of this object
2 2 (0x2) Get UINT Max. Instance Maximum instance number of an object currently created in
this class level of the device.
3 3 (0x3) Get UINT Number of
Instances
Number of object instances currently created at this class
level of the device.
Instance Attributes
Sr. No. Instance Attribute ID Access Data Type Attribute Name Attribute Description
11 (0x1),
2 (0x2),
3 (0x3),
4 (0x4)
3 (0x3) Set BOOL Logic output state
bit field
ON/OFF Status of Digital Outputs.
(BCM Field Output control)
21 (0x1),
2 (0x2),
3 (0x3)
5 (0x5) Set BOOL Fault Action Action taken on output’s value in
Communication Fault state
31 (0x1),
2 (0x2),
3 (0x3)
6 (0x6) Set BOOL Fault Value User-defined value for use with Fault
Action attribute
41 (0x1),
2 (0x2),
3 (0x3)
7 (0x7) Set BOOL Idle Action Action taken on output’s value in
Communication Idle state
51 (0x1),
2 (0x2),
3 (0x3)
8 (0x8) Set BOOL Idle Value User-defined value for use with Idle
Action attribute