Appendix C—Optional Communication Cards
Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com 271
Instance Attributes
Sr. No. Attribute ID Access Data Type Attribute Name Attribute Description
9 101 (0x65) Get UINT Motor Overload Trip FLA Motor Overload Trip FLA
10 102 (0x66) Get/Set UINT Motor Overload Trip FLA Motor1 Motor Overload Trip FLA Motor1
11 103 (0x67) Get/Set UINT Motor Overload Trip FLA Motor2 Motor Overload Trip FLA Motor2
12 104 (0x68) Get UINT Motor Current Scale Factor Motor Current Scale Factor
13 105 (0x69) Get UINT Motor Current Average Percent FLA Motor Current Average Percent FLA
14 106 (0x6A) Get USINT Thermal capacity level remaining Thermal capacity level remaining
15 107 (0x6B) Get UINT Time for overload to reach reset
threshold
Time for overload to reach reset threshold
16 108 (0x6C) Get UINT Time to Trip (overload) Time to Trip (overload)
17 109 (0x6D) Get/Set USINT Motor Overload Alarm Threshold Motor Overload Alarm Threshold
18 110 (0x6E) Get/Set USINT Thermal overload reset threshold. Level
where reset is possible.
Thermal overload reset threshold. Level where reset is
possible.
19 111 (0x6F) Get/Set UINT CT Ratio Active - Primary CT Ratio Active - Primary
20 112 (0x70) Get/Set UINT CT Ratio Active - Secondary CT Ratio Active - Secondary
21 113 (0x71) Get REAL Motor Current Average - Float Motor Current Average - Float
22 114 (0x72) Get REAL Motor Current Phase A - Float Motor Current Phase A - Float
23 115 (0x73) Get/ REAL Motor Current Phase B - Float Motor Current Phase B - Float
24 116 (0x74) Get REAL Motor Current Phase C - Float Motor Current Phase C - Float
25 117 (0x75) Get UINT Measurement Module FLA - Min Measurement Module FLA - Min
26 118 (0x76) Get UINT Measurement Module FLA - Max Measurement Module FLA - Max
Table 100. System Component Definition Object—Class 0x88 (136)
Class Services
Service
Code
Service Name
0x0E Get Attribute Single
Instance Services
Service
Code
Service Name
0x0E Get Attribute Single
0x10 Set Attribute Single
Class Attributes
Sr. No. Attribute ID Access Rule Data Type Name Attribute Description
1 1 Get UINT Revision Revision of this object
2 2 Get UINT Max Instance Maximum instance number of an object currently
created in this class level of the device.
3 3 Get UINT Number of Instances Number of object instances currently created at
this class level of the device.
Instance Attributes
Sr. No. Instance Attribute ID Access Data Type Attribute Name Attribute Description
1 1 (0x01) 1 (0x1) Get UINT BCM hardware rev BCM Product hardware revision numerical
2 1 (0x01) 2 (0x2) Get UINT BCM firmware rev BCM Firmware revision numerical
3 1 (0x01) 3 (0x3) Get UDINT BCM product Serial No. BCM Device Product Serial Number
4 1 (0x01) 4 (0x4) Get UINT BCM Product code BCM Product code.
5 1 (0x01) 5 (0x5) Get UINT BCM Product Sub code BCM Product Subcode.
Table 99. Overload Object—Class 0x2C (44), continued