Appendix C—Optional Communication Cards
274 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Table 102. Dynamic input Assembly Interface Object—Class 0x96 (150)
Class Services
Service
code Service Name
0x0E Get Attribute Single
Instance Services
Service
code Service Name
0x0E Get Attribute Single
0x10 Set Attribute Single
Class Attributes
Sr. No. Attribute ID Access Rule Data Type Name Attribute Description
1 0x1 Get UINT Revision Revision of this object
2 0x2 Get UINT Max. Instance Maximum instance number of an object
currently created in this class level of the
device.
3 0x3 Get UINT Number of Instances Number of object instances currently created at
this class level of the device.
Instance Attributes
Sr. No. Attribute ID Access Data Type Attribute Name Attribute Description Default
1 1 (0x1) Get/Set UINT Dynamic Assembly Interface-Index-1 An interface to insert the parameter in dynamic
assembly instance number 150, Index-1.
1
2 2 (0x2) Get/Set UINT Dynamic Assembly Interface-Index-2 An interface to insert the parameter in dynamic
assembly instance number 150, Index-2.
18
3 3 (0x3) Get/Set UINT Dynamic Assembly Interface-Index-3 An interface to insert the parameter in dynamic
assembly instance number 150, Index-3.
2
4 4 (0x4) Get/Set UINT Dynamic Assembly Interface-Index-4 An interface to insert the parameter in dynamic
assembly instance number 150, Index-4.
3
5 5 (0x5) Get/Set USINT Dynamic Assembly Interface-Index-5 An interface to insert the parameter in dynamic
assembly instance number 150, Index-5.
4
6 6 (0x6) Get/Set UINT Dynamic Assembly Interface-Index-6 An interface to insert the parameter in dynamic
assembly instance number 150, Index-6.
6
7 7 (0x7) Get/Set USINT Dynamic Assembly Interface-Index-7 An interface to insert the parameter in dynamic
assembly instance number 150, Index-7.
7
8 8 (0x8) Get/Set USINT Dynamic Assembly Interface-Index-8 An interface to insert the parameter in dynamic
assembly instance number 150, Index-8.
8
To Next Page
Loading...
