Eaton Power Xpert C445 - Table 96. Discrete Input Object-Class 0 X8

Appendix C—Optional Communication Cards
262 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Table 96. Discrete Input Object—Class 0x8 (8)
Class Services
Service
code Service Name
0x0E Get Attribute Single
Instance Services
Service
code Service Name
0x0E Get Attribute Single
0x10 Set Attribute Single
Class Attributes
Sr. No. Attribute ID Access Rule Data Type Name Attribute Description
1 1 (0x1) Get UINT Revision Revision of this object
2 2 (0x2) Get UINT Max. Instance Maximum instance number of an object currently
created in this class level of the device.
3 3 (0x3) Get UINT Number of Instances Number of object instances currently created at
this class level of the device.
Instance Attributes
Sr. No. Instance Attribute ID Access Data Type Attribute Name Attribute Description
1 1 (0x1), 3 (0x3) Get BOOL value ON/OFF Status of BCM Digital Inputs:
0: OFF, 1: ON
Instance 1- BCM Digital i/p-1
2 2 (0x2) 3 (0x3) Get BOOL value ON/OFF Status of BCM Digital Inputs:
0: OFF, 1: ON
Instance 2-BCM Digital i/p-2
3 3 (0x3) 3 (0x3) Get BOOL value ON/OFF Status of BCM Digital Inputs:
0: OFF, 1: ON
Instance 3-Digital i/p-3
4 4 (0x4) 3 (0x3) Get BOOL value ON/OFF Status of BCM Digital Inputs:
0: OFF, 1: ON
Instance 4-BCM Digital i/p-4
9 1 (0x1) 101 (0x65) Get/Set UINT Debounce BCM Digital i/p-1 debounce time. Applies to both
raising & Falling edge. (mSec)
10 2 (0x2) 101 (0x65) Get/Set UINT Debounce BCM Digital i/p-2 debounce time. Applies to both
raising & Falling edge. (mSec)
11 3 (0x3) 101 (0x65) Get/Set UINT Debounce BCM Digital i/p-3 debounce time. Applies to both
raising & Falling edge. (mSec)
12 4 (0x4) 101 (0x65) Get/Set UINT Debounce BCM Digital i/p-4 debounce time. Applies to both
raising & Falling edge. (mSec)