Eaton Power Xpert C445 - Table 113. Option Card Object-Class 0 Xb3

Appendix C—Optional Communication Cards
286 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Instance Attributes
Sr. No. Attribute ID Access Data Type Attribute Name Attribute Description
1 1 (0x1) Get Word Base Control Module DIP Switches Base Control Module DIP Switches
2 2 (0x2) Get UINT Base Control Module Control Voltage
(24VDC)
Base Control Module Control Voltage (24VDC)
3 3 (0x3) Get INT Base Control Module Ambient Board
Temperature
Base Control Module Ambient Board Temperature
4 4 (0x4) Get/Set INT Base Control Module Maximum Control
Board Temperature
Base Control Module Maximum Control Board
Temperature
Table 113. Option Card Object—Class 0xB3 (179)
Class Services
Service
Code Service Name
0x0E Get Attribute
Single
Instance Services
Service
Code Service Name
0x0E Get Attribute Single
0x10 Set Attribute Single
Class Attributes
Sr. No. Attribute ID Access Rule Data Type Name Attribute Description
1 1 (0x1) Get UINT Revision Revision of this object
2 2 (0x2) Get UINT Max Instance Maximum instance number of an object currently created
in this class level of the device.
3 3 (0x3) Get UINT Number of Instances Number of object instances currently created at this class
level of the device.
Instance Attributes
Sr. No. Attribute ID Access Data Type Attribute Name Attribute Description
1 1 (0x1) Get/Set UINT Modbus Comm Loss Timeout Value (ms) Modbus Comm Loss Timeout Value (ms)
2 2 (0x2) Get/Set UINT Web services Comm Loss Timeout Value
(ms)
Web services Comm Loss Timeout Value (ms)
3 3 (0x3) Get/Set BOOL Master Key for Hardcoded IP Address
Selection
Master Key for Hardcoded IP Address Selection
4 4 (0x4) Get Array of 4
USINT
Active IP Address Active IP Address
Table 112. BCM Object—Class 0xB1 (177), continued