Eaton Power Xpert C445 - Page 248

Appendix C—Optional Communication Cards
234 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Input Instance 103 (0x67): Status Current Monitoring with Extended Analog and Digital Inputs
Length = 32 Bytes
Byte
Offset
Size
(bytes) Name Description
0 2 Device Status C445_DEVICE_STATUS:
Device Bit Array
Bit 0: Faulted/Tripped
Bit 1: Warning
Bit 2: Output #1
Bit 3: Output #2
Bit 4: Input #1
Bit 5: Input #2
Bit 6: Input #3
Bit 7: Input #4
Bit 8: Running1
Bit 9: Running2
Bit 10: Remote or CtrlFromNet
Bit 11: Output #3
Bit 12: Reserved
Bit 13: Inhibited
Bit 14: Ready
Bit 15: AtRef or Up-To-Speed
2 2 Current L1 MOTOR_I_A_SCALED:
Phase A (L1) Motor Current Scaled.
Scaled by parameter “I Scale Factor.”
4 2 Current L2 MOTOR_I_B_SCALED:
Phase B (L2) Motor Current Scaled.
Scaled by parameter “I Scale Factor.”
6 2 Current L3 MOTOR_I_C_SCALED:
Phase C (L3) Motor Current Scaled.
Scaled by parameter “I Scale Factor.”
8 2 Digital Inputs Bits 0-7 = Inputs for the first digital input card
Bits 8-15 = Inputs for the second digital input card
10 2 Digital Inputs Bits 0-7 = Inputs for the first digital input card
Bits 8-15 = Inputs for the second digital input card
12 2 Digital Inputs Bits 0-7 = Inputs for the first digital input card
Bits 8-15 = Inputs for the second digital input card
14 2 Digital Inputs Bits 0-7 = Inputs for the first digital input card
Bits 8-15 = Inputs for the second digital input card
16 38 Analog Inputs 19 Input words of data for analog inputs and status word(s)
Output Instance 104 (0x68): Basic Starter Relay
Length = 2 Bytes
Byte
Offset
Size
(bytes) Name Description
0 2 Extended Motor
Starter 2
Vendor specific Extended Motor starter
Bit 0 = Run1
Bit 1 = Run2
Bit 2 = Reserved
Bit 3 = Fault Reset
Bit 4 to 15 = Reserved