Eaton Power Xpert C445 - Page 279

Appendix C—Optional Communication Cards
Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com 265
Instance Attributes
Sr. No. ID Access Rule Data Type Description
12 101 (0x65) Get/Set BYTE Fieldbus Motor
Control
Device Bit Array
Bit 0: Run1
Bit 1: Run2
Bit 2: Reserved
Bit 3: Fault Reset
Bit 4: Reserved
Bit 5: Test Trip
Bit 6: Reserved
Bit 7: Reserved
13 102 (0x66) Get/Set BYTE Network Control
Word with
NetCtrl bit
Device Bit Array
Bit 0: Run1
Bit 1: Run2
Bit 2: Reserved
Bit 3: Fault Reset
Bit 4: NetCtrl
Bit 5: Test Trip
Bit 6: Reserved
Bit 7: Reserved
14 103 (0x67) Get/Set BYTE FieldBus Input
Feedback
Register
Bit 0: Network feedback input0
Bit 1: Network feedback input1
Bit 2: Network feedback input2
Bit 3: Network feedback input3
Bit 4: Network feedback input4
Bit 5: Network feedback input5
Bit 6: Network feedback input6
Bit 7: Network feedback input7
15 104 (0x68) Get WORD Packed Device
Status
Bit 0: Faulted/Tripped
Bit 1: Warning
Bit 2: Output #1
Bit 3: Output #2
Bit 4: Input #1
Bit 5: Input #2
Bit 6: Input #3
Bit 7: Input #4
Bit 8: Running1
Bit 9: Running2
Bit 10: Remote or CtrlFromNet
Bit 11: Output #3
Bit 12: Reserved
Bit 13: Inhibited
Bit 14: Ready
Bit 15: AtRef or Up-To-Speed
16 105 (0x69) Get BYTE Motor Control
Status
Bit 0: Running1
Bit 1: Running2
Bit 2: Remote or CtrlFromNet
Bit 3: Faulted/Tripped
Bit 4: Warning
Bit 5: Inhibited
Bit 6: Ready
Bit 7: AtRef or Up-To-Speed
Table 98. Control Supervisor Object—Class 0x29 (41), continued