Eaton Power Xpert C445 - Page 346

Appendix D—Modbus Register Map
332 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
728 2-Wire/3-Wire UINT8 RW NV
Default: 0
Enum
Config CRC
Run Lock
Admin Lock
USB Lock
Backup Mem
Selects 2 or 3 wire control. When 2-Wire Control is used, the fieldwire
inputs are designed to a run signal. If a signal is present at the run input, it
will command to run while if no signal is present, it will stop or not run.
When 3-Wire control is Used, a second fieldwire input is designated to
accept a Run input and a Permissive input. When in fieldwire control, the
motor will not be allowed to run if the Permissive signal is not present.
Additionally, if the permissive is removed while running, the motor will
stop. The Run input in 3-Wire Control can accept a maintained or pulsed
run command.
729 Digital Input Debounce UINT16 RW NV
Array size: 4
Default: 20
Range: 5 to 5000
Units: ms
Backup Mem
Digital Input Debounce. One 16-bit value for each of the 4 inputs on the
Base Control Module. The same value is used for both rising and falling
edges.
Array of 4 registers
733 LED Brightness Bank 0 INTERNAL
UINT8 RW NV
Default: 0
Enum
Units: %
Backup Mem
LED Brightness Configuration Bank 0
734 LED Brightness Bank 1 INTERNAL
UINT8 RW NV
Default: 0
Enum
Units: %
Backup Mem
LED Brightness Configuration Bank 1
735 LED Brightness Bank 2 INTERNAL
UINT8 RW NV
Default: 0
Enum
Units: %
Backup Mem
LED Brightness Configuration Bank 2
736 LED Brightness Bank 3 INTERNAL
UINT8 RW NV
Default: 0
Enum
Units: %
Bac
kup Mem
LED Brightness Configuration Bank 3
Table 128. C445 Modbus Register Map, continued
Register Name Attribute Description
Value Description
0 Two wire field wiring configuration
1 Three wire field wiring configuration
Value Description
0 High LED brightness
1 Medium LED brightness
2 Low LED brightness
Value Description
0 High LED brightness
1 Medium LED brightness
2 Low LED brightness
Value Description
0 High LED brightness
1 Medium LED brightness
2 Low LED brightness
Value Description
0 High LED brightness
1 Medium LED brightness
2 Low LED brightness