EBARA EV-A10 - Page 27

P.27
PM10U
EBARA
CORPORATION
Connect the power connector for the main power supply (1Phase, 200-240V±10% and 50/60Hz).
The power connector type is “IEC 60320-C20”.
 The connector type of the power cable is “IEC 60320-C19”.
 Use the power cable which suits “IEC 60320-C19”.
 Transit overvoltage on power supply : Instrallation category 2 of “IEC 60364-4-443”.
B : For model EV-A10-3* (3Phase 200V)
Fig. 3.2 shows details of the front panel of model EV-A10-3*.
Fig. 3.2 Details of the front panel of model “EV-A10-3*”
Power connector
: Amphenol
C016 20C003 100 12
Control connector
:
D
-
sub 15Pin (Fem
ale)
Circuit protector
Terminal block
: for thermal protector