Echo CS-2511WES Service Manual

FUEL SYSTEM
29
CS-2511WES
251Ws
4-6 Replacingpurgebulb
{Removing}
1. Remove rear handle (Refer to 9-3 Replacing
rear handle and springs ).
2. Press leg (a1) of purge bulb (A) with screwdriver
to remove purge bulb (A) from rear handle.
3. Disconnect parge line (B) and fuel return line (C)
from purge bulb (A).
{Installing}
4. Connect fuel return line (C) to longer tting (a2)
of purge bulb (A). Connect purge line (B) to shorter
tting (a3) of purge bulb (A).
5. Install purge bulb (A) with fuel return line (C) and
purge line (B) into rear handle.
6. Reassemble removed parts.
A
a1
B
C
A
C
B
a2
a3

Echo CS-2511WES Specifications

General

Brand	Echo
Model	CS-2511WES
Category	Chainsaw
Language	English