Echo CS-2511WES Service Manual

ENGINE
59
CS-2511WES
251Ws
8-5 Removing engine block (continued)
4. Pull out engine block (B) as shown.
8-6 Inspectingcylinder
1. Remove four bolts securing cylinder (A) and re-
move cylinder (A).
NOTE : If it’s hard to remove cylinder (A), gently
tap both crankshaft ends using plastic mallet (B) to
remove crankcase assembly with crankshaft and
piston assembly, holding cylinder (A).
2. Inspect cylinder combustion chamber and clean
with a plastic or wooden scraper if carbon is found.
NOTE: Do not use metal tools, or damage to cylin-
der wall may result.
3. Inspect cylinder wall and replace with new one
if plating is worn, peeled away, scored or exposing
cylinder base metal.
B
A
B
A

Echo CS-2511WES Specifications

General

Brand	Echo
Model	CS-2511WES
Category	Chainsaw
Language	English