Echo CS-2511WES Service Manual

SAW CHAIN LUBRICATION SYSTEM
47
CS-2511WES
251Ws
7-2Inspectingoiltankvent
NOTE: Oil tank vent prevents a vacuum from
forming in oil tank when chain oil in the tank is con-
sumed.
1. Remove starter assembly.
2. Push oil tank vent (A) into oil tank using suitable
tool and take out vent (A) from oil tank.
3.Clean oil tank vent (A).
4. Check that oil tank vent lips (a) are not hard or
deformed. Replace as required.
5. Install oil tank vent (A) using suitable tool (B) as
shown.
6. Reassemble starter assembly.
a
A
B
A

Echo CS-2511WES Specifications

General

Brand	Echo
Model	CS-2511WES
Category	Chainsaw
Language	English