EG4 LuxPowerTek 6000XP User Manual

46
6
Ic:
Maximum Charge
Current
(Utility+Solar)
This setting allows the user to
set the maximum charge
current.
Total Charge Current:
Range: 0 – 125A
Default: 125A
AC Charge Current:
Range: 0 – 125A
Default: 30A
Generator Charge Current:
Range: 0 – 110A
Default: 30A
7
ConChr:
CV Voltage (Lead-
Acid Only)
This setting allows the user to
set the Charging Voltage for
Lead-Acid batteries only.
Lead-Acid Charging Voltage:
Range: 50.0 – 59.0VDC
Default: 56.4VDC
8
FloChr: Floating
Charge Voltage
(Lead-Acid Only)
This setting allows the user to
set the Lead-Acid Battery
Float Charge Voltage.
Lead-Acid Floating Charge
Voltage:
Range: 50.0 – 56.0VDC
Default: 54.0VDC
9
Id:
Maximum
Discharge Current
This setting allows the user to
set the Maximum Discharge
Current.
Maximum Discharge
Current:
Range: 10 – 140A
Default: 140A

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan