EG4 LuxPowerTek 6000XP User Manual

47
10
TEOd: Discharge
Control Type
(Volt/SOC)
This setting allows the user to
select Voltage or SOC as the
trigger for battery discharge.
11
CutOFF:
Cut off
Voltage/SOC
This setting allows the user to set
the cutoff Voltage or SOC based on
the selection made in Setting 10,
TEOd.
Cutoff Voltage:
40.0 – On-Grid EOD Voltage
Default: 42V
Cutoff SOC:
Range: 0 – On-Grid EOD SOC%
Default: 15%
12
Eod:
Battery Discharge
Cutoff
This setting allows the user to set
the End-Of-Discharge Voltage and
SOC parameters.
End of Discharge Cutoff Voltage:
Range: Cutoff Voltage – 56V
Default: 42V
End of Discharge Cutoff SOC:
Range: Cutoff SOC – 90%
Default: 15%

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan