EG4 LuxPowerTek 6000XP User Manual

48
13
AC In:
AC Voltage Range
Setting
This setting allows the user to set
the AC Input Voltage Range
AC In Voltage Range:
APL – 90-280VAC
UPS – 170-280VAC
14
AC Charge Setting
To configure AC charging, the user must first enable AC Charging, confirm the full
battery SOC value, and set the confirmation time periods 1, 2, and 3.
AC Charge Control Settings for Voltage and SOC:
Voltage:
Start Voltage: 35.4 – 52V
End Voltage: 48 - 59V
SOC:
Start SOC: 1 – 90%
End SOC: 20 – 100%
AC Charge Control Settings for Start/End Times:
Start Time1-3:
Range: 00:00 – 23:59
Default: 00:00 – 00:00
End Time1-3:
Range: 00:00 – 23:59
Default: 00:00 – 00:00

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan