EG4 LuxPowerTek 6000XP User Manual

49
15
AC Input Load
Timer Settings
This setting allows the user to
set the Start/End times for the
Grid/Utility to supply power to
the load.
Start Time1-3: 00:00 – 23:59
Default: 00:00 – 00:00
End Time1-3: 00:00 – 23:59
Default: 00:00 – 00:00
17
Battery Wakeup
This setting allows the user to enable or
disable the battery wakeup feature. It is
not applicable if no battery type is
defined.
Range: Enable/Disable
18
Max Generator
Input Power
This setting allows the user to
set the maximum generator
input power.
Range: 0-7369W
Default: 7369
19
PV Off-Grid
Enable/Disable
This setting allows the user to
configure the system to only
use PV for loads. Due to
voltage fluctuation, power
output may be inconsistent.
Range: Enable/Disable
Default: Enable

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan