EG4 LuxPowerTek 6000XP User Manual

50
20
Power Save
Function
This setting allows the user to
enable or disable the Power
Save Functions, ‘Green
Function’ and ‘ECO Mode’.
Range: Enable/Disable
The default settings for both
functions are set to disabled.
21
Parallel Setting
This setting allows the user to
select the inverter paralleling
configuration.
Parallel Type: NoPL (Not Parallel), 1PH (Single Phase), 3PH (Three Phase)
Default: NoPL
Parallel Phase: P1 (R-Phase), P2 (S-Phase), P3 (T-Phase)
Default: P1 (R-Phase)
Battery Share Enable/Disable: Disable/Enable
Default: Disable
22
Error/Alarm
Record
This setting allows the user to
see Error and Alarm records.
Error Record:->Record Setting->Record Message
(Year:Month:Day; Hour:Min:Sec; Error Code)
Alarm Record:->Record Setting->Record Message
(Year:Month:Day; Hour:Min:Sec; Alarm Code)

EG4 LuxPowerTek 6000XP Specifications

General

Category	Inverter
Rated Power	6000W
Max DC Input Power	7800W
Number of MPPT Trackers	2
Battery Voltage	48V
Max Charge/Discharge Current	120A
Protection Degree	IP65
Frequency	50/60Hz
Model	LuxPowerTek 6000XP
Communication	RS485
Operating Temperature Range	-25°C to 60°C
Protection Features	Over Voltage Protection, Over Temperature Protection
Cooling	Fan